EAP235-Wall
Omada AC1200 Wireless MU-MIMO Gigabit Wall Plate Access Point
- Fast Dual-Band Wi-Fi: Simultaneous 300 Mbps on 2.4 GHz and 867 Mbps on 5 GHz totals 1,167 Mbps Wi-Fi speeds with MU-MIMO.†
- Four Gigabit Ports: 4 Gigabit Ethernet ports (1× uplink + 3× downlink), with one downlink port supporting PoE pass-through to provide power for wired device.
- Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)‡, Centralized Cloud Management, and Intelligent Monitoring.
- Centralized Management: Cloud access and Omada app for ultra convenience and easy management.
- Elegant Appearance: Ultra slimmest and conspicuous design blends into hotel rooms, hospitals, offices, dormitories and any other environments.
- Easy Installation and PoE Support: Easy-mount construction, compatible with 86 mm & EU & US standard junction box, and 802.3af/at PoE support.
- Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies.
- Advanced Wireless Tech: Optimize network performance with MU-MIMO, Band Steering, and Beamforming technologies.
11ac Wi-Fi for the Best Room-by-Room Connection
EAP235-Wall
Dedicated Complete, Private Wi-Fi Network in Each Room
An EAP in each room allows guests to enjoy their own private Wi-Fi network that’s fast, delivering a strong signal, and providing corner to corner coverage.
MU-MIMO + Dual-Band: Connect Faster and More
802.11ac wave 2 MU-MIMO technology enables multiple users to access the Internet simultaneously, which largely boosts up your network speed of up to 1,200 Mbps. Capable of transmitting in both 2.4 GHz and 5 GHz wireless band, it provides greater compatibility to connect varieties of devices.†
- 5 GHz 867 Mbps
- 2.4 GHz 300 Mbps
With MU-MIMO
Without MU-MIMO
Absolute Thinnest, Inconspicuous Design
The thinnest wall plate AP available—only 15 mm—featuring a sleek, minimalist appearance. Designed to blend in with the décor of hotel rooms, hospitals, offices and school dormitories, to deliver powerful Wi-Fi without clashing with the room.
-
EAP235-Wall
-
Traditional
Effortless Deployment with PoE Powered
With 802.3af/802.3at Power over Ethernet supported there’s no need to install additional wiring in the building. Simply plug in existing Ethernet cables and you’re ready to go.
Quick, Simplified Installation
EAP235-Wall is easy to install, so extra cost, time, or professional knowledge are completely unnecessary.
*Fits three kinds of wall junctions
-
86 mm wall junction box
-
Standard EU wall junction box
-
Standard US wall junction box
Full Gigabit Ports to Bridge Network
Equipped with four Gigabit data ports (1*uplink + 3*downlink), one downlink port offering PoE pass-through, to connect multiple devices to your gigabit network. Wired devices like VoIP phones can be powered with no need for extra electrical cables.
- VoIP Phone
- printer
Omada SDN—Smarter Cloud Solution for Business Networking
Omada Software Defined Networking (SDN) platform integrates network devices including access points, switches and gateways, guaranteeing powerful business network with higher efficiency, higher security, and higher reliability.
Cloud-Based Controller
Hassle-Free Centralized Cloud Management:
100% centralized cloud management of whole network from different sites—all controlled from a single interface anywhere, anytime.
Easy Management with the Omada App
Follow configuration instructions on the Omada app to get set up in minutes. Omada lets you configure settings, monitor the network status and manage clients, all from the convenience of a smart phone or tablet.
硬體規格 | |
---|---|
連接介面 | • Uplink: 1× 10/100/1000 Mbps Ethernet Port• Downlink: 3× 10/100/1000 Mbps Ethernet Ports (One port supports PoE OUT. The PoE OUT feature requires 802.3at PoE+ input and the maximum output is 13 W.) |
物理安全鎖 | Yes |
按鈕 | Reset |
電源供應 | 802.3af/802.3at PoE |
功耗 | 9.8 watts /24.4 watts (PoE Out Included) |
尺寸大小(長 x 寬 x 高) | 143 × 86 × 20 mm (5.6 × 3.4 × 0.8 in) |
尺寸大小 | 143 × 86 × 20 mm (5.6 × 3.4 × 0.8 in) |
天線 | 2 Dual-Band Antennas• 2.4 GHz: 2× 4 dBi• 5 GHz: 2× 4 dBi |
安裝 | Wall Plate Mounting |
無線網路規格 | |
---|---|
可容納無線裝置連線數量 | 200+** |
無線網路標準 | IEEE 802.11a/b/g/n/ac |
無線網路頻率 | 2.4 GHz and 5 GHz |
訊號速率 | • 5 GHz: Up to 867 Mbps• 2.4 GHz: Up to 300 Mbps |
無線網路功能 | • 16 SSIDs (Up to 8 SSIDs on each band)• Enable/Disable Wireless Radio• Automatic Channel Assignment• Transmit Power Control (Adjust Transmit Power on dBm)• QoS(WMM)• MU-MIMO• Band Steering• Beamforming• Load Balance• Rate Limit• Reboot Schedule• Wireless Schedule• Wireless Statistics based on SSID/AP/Client |
無線網路安全性 | • Captive Portal Authentication• Access Control• Wireless Mac Address Filtering• Wireless Isolation Between Clients• SSID to VLAN Mapping• Local LAN port based VLAN• Rogue AP Detection• 802.1X Support• 64/128/152-bit WEP, WPA/WPA2-PSK, WPA/WPA2-Enterprise |
傳輸功率 | • CE:≤20 dBm (2.4 GHz, EIRP)≤23 dBm (5 GHz, EIRP)• FCC:≤21 dBm (2.4 GHz)≤21 dBm (5 GHz) |
管理功能 | |
---|---|
Omada App | Yes |
集中化管理 | • Omada Cloud-Based Controller• Omada Hardware Controller (OC300)• Omada Hardware Controller (OC200)• Omada Software Controller |
雲端存取 | Yes (Through OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller) |
E-mail警示 | Yes |
LED 開/關 控制 | Yes |
管理MAC存取控制 | Yes |
SNMP | v1,v2c |
系統登入本地/遠端系統日誌 | Local/Remote Syslog |
SSH | Yes |
Web管理介面 | HTTP/HTTPS |
L3 管理 | Yes |
多站點管理 | Yes |
管理VLAN | Yes |
零接觸監管 | Yes. Requiring the use of Omada Cloud-Based Controller. |
其他規格 | |
---|---|
認證 | CE, FCC, RoHS |
包裝內容 | • Omada AC1200 Wireless MU-MIMO Gigabit Wall Plate Access Point EAP235-Wall• Installation Guide• Mounting Screw |
系統需求 | Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10 |
環境 | • Operating Temperature: 0–40 ℃ (32–104 ℉)• Storage Temperature: -40–70 ℃ (-40–158 ℉)• Operating Humidity: 10–90% RH non-condensing• Storage Humidity: 5–90% RH non-condensing |
†Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) client limitations, including rated performance, location, connection, quality, and client condition.
‡Zero-Touch Provisioning requires the use of Omada Cloud-Based Controller.