AC1200 Wireless MU-MIMO Gigabit Indoor/Outdoor Access Point

How to Configure Installation Type for Omada Outdoor AP

Regulations on indoor/outdoor wireless use vary by region, impacting Omada Outdoor AP performance and compliance. If deployed incorrectly, certain 5GHz channels may be restricted. For example, in Germany, CE regulations prohibit outdoor use of UNII-1 and UNII-2A bands, while all UNII-1 to UNII-2C bands are allowed indoors. To ensure compliance and optimal performance, Omada Outdoor APs support Installation Type, allowing users to adjust settings based on deployment scenarios.

Instructions for SSID security settings on Omada Controller

Omada Controller supports five encryption methods for wireless security: None, WPA-Personal, WPA-Enterprise, PPSK without RADIUS, and PPSK with RADIUS. Users can choose different encryption methods according to their actual needs.

How to configure MAC-Based Authentication on Omada Controller

MAC-Based Authentication allows specific clients to access a wireless network based on their MAC addresses while denying access to the rest.

How to configure SSID VLAN on Omada AP with Third-Party Gateway

This article introduces how to configure SSID VLAN on the Omada APs to realize VLAN isolation.

How to Configure 802.11 Rate Control on Omada Controller

If your network includes a significant number of legacy wireless clients using 802.11a/b/g standards, and most clients are experiencing degraded performance (such as slow webpage loading, video buffering, or high latency), you can enhance network efficiency by adequately configuring the 802.11 Rate Control feature in the Omada Controller.

Should I keep the Omada Controller running after configuration?

This article explains whether you need to keep an Omada Controller running to use different functions of APs. Objective

How to configure Omada EAP in Repeater mode

What can I do If Omada App can’t find my AP

This article will introduce what you can do when Omada App can’t find your standalone AP, such as turn off VPN on mobile phone, enable local network, reboot and reset AP, etc.

How to get sarted with Standalone Access Points without Omada Controller

This article will help you start with Standalone Access Points without an Omada Controller.

How to configure abnormal on Omada Pro Controller

This article will introduce how to configure the Abnormal feature on the Omada Pro Controller. Thanks to the intelligent anomaly detection system that records abnormal incidents, identifies their causes and offers maintenance suggestions, users can analyze network issues efficiently and enjoy a simple, intuitive, and reliable solution.