CPE CPE605

CPE605

5GHz 150Mbps 23dBi CPE exterior

Hasta 150 Mbps en velocidades de datos inalámbricas de 5 GHz
Antena direccional de alta ganancia de 23dBi y un reflector de metal dedicado, ideal para aplicaciones de larga distancia
Excelente directividad del haz, latencia mejorada y cancelación de ruido
Las innovadoras piezas de bloqueo a presión permiten un ensamblaje rápido y un diseño estructural resistente mantiene estable el CPE605 incluso con vientos fuertes
El gabinete resistente a la intemperie IP65 junto con ESD de 15 kV y protección contra rayos de 6 kV garantiza la idoneidad para todo clima
La tecnología TP-Link Pharos MAXtream TDMA mejora el rendimiento, la capacidad y el rendimiento de latencia
Pharos Control ofrece a los administradores un sistema de gestión centralizado gratuito
Soporte pasivo de PoE para permitir una implementación flexible y una instalación conveniente

Obtenga más información sobre Pharos Control>

Descripción General

2×2 MIMO
MAXtream TDMA

23dBi directional antenna and professional structural stability for long-distance outdoor Wi-Fi transmission

23dBi Directional
Antenna
Easy Assembly &
Flexible Installation
Wind-resistant
Construction
IP65 Weatherproof
Enclosure
6KV Lightning Protection &
15KV ESD Protection

Professional-standard 23dBi Directional
Antenna for Long-range Wireless Transmission

With 23dBi high-gain directional 2×2 MIMO Cassegrain antenna and dedicated metal reflector, the CPE610 provides excellent beam directivity, improved latency and noise immunity. Professional performance, coupled with user-friendly design, makes the 5GHz 300Mbps 23dBi Outdoor CPE610 an ideal choice and cost effective solution for outdoor wireless networking applications.

Stable Structural Design and Flexible Installation

Antenna
Feed
Side
Reflector Panel
Center
Reflector Panel
Side
Reflector Panel

Pole Mount

Feed Receiver

Snap-lock parts make assembly simple and convenient
Pole mount kits and the freedom of three-axis alignment facilitate flexible installation
Sturdy design ensures stability in windy conditions

Compact and
Lightweight Packaging

Small and lightweight boxes
benefit shipping, logistics and retail.

17.5cm

0cm

32.6cm

0cm

32.5cm

0cm

14.2cm

Pharos Control – Centralized Management System

CPE610 comes equipped with Pharos Control centralized management software, helping users easily manage all devices in their network from a single PC. Functions include device discovery, status monitoring, firmware upgrading, and network maintenance. An intuitive web-based interface– PharOS - provides an alternative management method, and allows professionals to access more detailed configurations.

Especificaciones

CARACTERÍSTICAS DE HARDWARE
Procesador	Qualcomm 560MHz CPU, MIPS 74Kc
Memoria	64MB DDR2 RAM,8MB Flash
Interface	1 10/100Mbps Shielded Ethernet Port (LAN/POE) 1 Reset Button
Fuente de Alimentación	Passive Power over Ethernet via LAN (+4,5pins; -7,8pins) Voltage range: 16-27VDC
Dimensiones (W X D X H)	350 x 255 x 207 mm (13.8 x 10.0 x 8.1 in.)
Ganancia de Antena	23dBi
Cobertura de Antena	7°(Azimuth), 10°(Elevation)
Protección	15KV ESD Protection 6KV Lightning Protection
Cercado	Material: Outdoor PC stabilized plastic Weatherproof: IP65 water and dust proof design

CARACTERÍSTICAS INALÁMBRICAS
Estándares Inalámbricos	IEEE 802.11a/n
Protocolo Propietario	TDMA Mode (with Pharos MAXtream enabled)
Velocidades Inalámbricas	Up to 150Mbps (40MHz,Dynamic) Up to 72.2Mbps (20MHz,Dynamic) Up to 36.1Mbps (10MHz,Dynamic) Up to 18.05Mbps (5MHz,Dynamic)
Frecuencia	5.15~5.85GHz
Potencia de Transmision	Max. 23dBm (Adjustable power by 1dBm)

CARACTERÍSTICAS DE SOFTWARE
IPv6	Yes
Configuracion De Red	WAN: Static/Dynamic/PPPoE/L2TP/PPTP LAN: Static/Dynamic/DHCP Forwarding: ALG/UPnP/Virtual Server/Port Trigger Security: SPI Firewall/ Ping Forbidden/DoS Protection Access Control Static Routing Bandwidth Control IP & MAC Binding
Configuraciones Inalámbricas	Pharos MAXtream TDMA Technology Selectable Channel Width: 5/10/20/40MHz Auto Channel Selection Transmit Power Control Dynamic Frequency Selection(DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging(AP Mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: Beacon Interval/RTS Threshold/Fragmentation Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
Administración	Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server
Herramientas de sistema	Indicators:Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute
Optimizaciones a Nivel de Sistema	Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog

POE ADAPTER FEATURES
Dimensions(W x D x H)	85.8×43.9×29.7 mm
Interfaces	1 AC Jack with Earth Ground 1 10/100Mbps Shielded Ethernet Port (Power + Data) 1 10/100Mbps Shielded Ethernet Port (Data)
Botón	Remote Reset Button
Power Status LEDs	Green
Input	100-240VAC, 50/60Hz
Output	24VDC, 0.6A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)
Eficiencia	>84.29%
Certifications	CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark

Otros
Certificacion	CE, FCC, RoHS, IP65
Contenidos del Paquete	Outdoor Wireless CPE 24V 0.5A Passive PoE Adapter Pole Mounting Straps AC Power Cord Installation Guide
Requisitos del Sistema	Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.
Ambiente	Operating Temperature: -40℃~70℃ (-40℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing

For additional version information, please go to the support page.

Soporte

*Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications along with the number of connected devices were defined according to test results under normal usage conditions. Actual wireless transmission rate, wireless coverage, and number of connected devices are not guaranteed, and will vary as a result of 1) environmental factors, including building materials, physical objects and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead and 3) client limitations, including rated performance, location, connection quality, and client condition.
*Protection against lightning and electro-static discharge may be achieved through proper product setup, grounding and cable shielding. Refer to the instruction manual and consult an IT professional to assist with setting up this product.
*Power supply distances are based on test results under normal usage conditions. Actual power supply distance will vary as a result of 1) AP status, including transmit power, connected devices and network traffic, 2) cable properties, including type and texture and 3) environmental factors, which include temperature and humidity.

From United States?

Get products, events and services for your region.

Ir Other Option