Tapo and Kasa Devices Unable to be Controlled in the App
66048 This FAQ will walk you through a few typical cases for troubleshooting a Kasa or Tapo device that their app cannot control.
Case 1. I cannot use the Tapo or Kasa app to control my smart devices in the local network
- Check the smart device's LED status as per the User Guide. If the LED status shows that the device is not working properly, please reset and re-configure it.
- If the smart device was working fine before, confirm if there are any changes in the router or the network environment.
- Go to the “Device Settings” page on the Tapo or Kasa app to check the signal strength of the Tapo or Kasa device.
- If the signal strength ranges from -60dBm to -40dBm, the smart device has a good signal from the router.
- If the signal strength is less than -60dBm, the signal strength from the router is too weak. In this case, please move the smart device closer to your router for a try.
- Upgrade the smart device to the latest firmware
Case 2. I cannot use the Tapo/Kasa app to control my smart devices remotely
- Make sure you can control the smart device in the local network. If you cannot, please refer to Case 1 to troubleshoot.
- To upgrade the smart device to the latest firmware, you may refer to the instructions:
- Change the DNS server to 8.8.8.8 on your home modem/router.
- Ensure the router is working properly. Connect your phone or laptop to the router's Wi-Fi network and check if the device has internet access.
- Disable firewall settings if there is one on your home router, then reboot the router.
Case 3. Cannot control the smart devices through the physical button
If you cannot control your smart device through the physical button, it may be a wiring issue or a defective device. For smart switches, please check the following resources:
[For HS200]
Setup Video: HS200 setup video
FAQ: How do you install HS200 on your electrical line?
[For HS210]
Setup Video: How to install the Kasa 3-way Light Switch Kit
FAQ: HS210 Installation FAQ Content
[For HS220]
Setup Video: How to install the Kasa Smart light switch dimmer
[For KS230 KIT]
Setup Video: Installing and Setting Up the Kasa KS230 3-Way Dimmer Switch
FAQ: How to Install My Kasa Smart 3-Way Dimmer Switches (KS230 KIT)
Is this faq useful?
Your feedback helps improve this site.
-1000x1000_normal_20231005224459m.png)
TP-Link Community
Still need help? Search for answers, ask questions, and get help from TP-Link experts and other users around the world.