KIT_US_normal_1573089299153b.jpg)
KIT_US_large_1573089299153l.jpg)
TL-WPA4220 KIT
End of Life300Mbps Wi-Fi Range Extender, AV600 Powerline Edition
- One Touch Super Range Extension - Wi-Fi Clone Button simplifies your Wi-Fi configuration and helps build a seamless unified home network
- HomePlug AV standard compliant
- Extend 300Mbps wireless connections to previously hard-to-reach areas of your home and office*
Wired or Wireless? Why not Both!
Meet an Excellent Home Network Solution
300Mbps AV600 Wi-Fi Powerline
Extender Starter Kit
TL-WPA4220 KIT
Wi-Fi Auto-Sync for Unified Wi-Fi Network**
Wi-Fi Auto-Sync creates a simple, intuitive powerline experience. Pressing the Wi-Fi Clone button instantly copies your network name and password from your router for easy setup. Wi-Fi Move automatically applies any settings changes across the network. Your existing Wi-Fi settings will be synchronized to the new extender automatically.
Extend Your Powerline Network to Any Room*
Based on the Powerline technology, your network extension is never limited to the primary coverage of your router. With advanced HomePlug AV2，TL-WPA4220 KIT is perfect for delivering ultra-fast data transfer speed and brings network to anywhere there is a power outlet.
Plug, Pair and Play!
Plug the TL-PA4010 in the wall and connect it to the router with an Ethernet cable.*** Then plug the TL-WPA4220 in any desired power outlet.
Press the ‘Pair’ buttons on both adapters to create a secure network.
There you go! Just enjoy the seamless, high speed wired and wireless network.
＊ Powerline adapters need to be connected to the same electrical circuit.
Pair
Pair
Powerline Management on Your Smartphone
The tpPLC Utility and tpPLC app make it easy to control wireless network settings, set schedules for Wi-Fi availability and even control the LED indicators on your adapters from any iOS or Android device. You can download the tpPLC app for iOS and Android devices. You can download the intuitive new tpPLC Utility for your PC at www.tp-link.com/en.
.jpg)
| HARDWARE FEATURES | |
|---|---|
| Standards and Protocols | HomePlug AV, IEEE802.3, IEEE802.3u, IEEE802.11b/g/n |
| Plug Type | US |
| Interface | 2*10/100Mbps Ethernet Port |
| Button | Pair, Reset, Wi-Fi/Wi-Fi Clone |
| Max. Power Consumption | Maximum: 7.608W Typical: 7.216W Standby: 4.610W |
| LED | PWR, PLC, ETH, Wi-Fi/Wi-Fi Clone |
| Dimensions ( W x D x H ) | 3.7 x 2.1 x 1.6 in. (94×54×40mm) |
| Range | 300 Meters over electrical circuit |
| WIRELESS FEATURES | |
|---|---|
| Frequency | 2.4-2.4835GHz |
| Signal Rate | 11n: Up to 300Mbps(dynamic) 11g: Up to 54Mbps(dynamic) 11b: Up to 11Mbps(dynamic) |
| Reception Sensitivity | 270M: -68dBm@10% PER 130M: -68dBm@10% PER 108M: -68dBm@10% PER 54M: -68dBm@10% PER 11M: -85dBm@8% PER 6M: -88dBm@10% PER 1M: -90dBm@8% PER |
| Wireless Security | 64/128-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK |
| Advanced Features | Enable/DisableWireless Radio,WMM, Wireless Statistics |
| Transmission Power | CE:<20dBm(2.4GHz) FCC:<30dBm |
| SOFTWARE FEATURES | |
|---|---|
| Modulation Technology | OFDM (PLC) |
| Encryption | Powerline Security: 128-bit AES Wireless Security: WEP, WPA/WPA2, WPA-PSK/WPA2-PSK Encryption |
| OTHERS | |
|---|---|
| Certification | FCC, RoHS |
| Package Content | Powerline Ethernet Adapter TL-WPA4220 & TL-PA4010 6.5 ft. (2 m) Ethernet cable (RJ45) Quick Installation Guide |
| System Requirements | Windows 2000/XP/2003/Vista, Windows 7/8/8.1/10, Mac, Linux |
| Environment | Operating Temperature: 0°C~40°C (32°F ~104°F) Storage Temperature: -40°C~70°C (-40°F ~158°F) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
*The terms “AV600” and “300Mbps” are derived from applicable specifications and refer to the theoretical maximum physical-layer data transfer rate. Those terms are used on this product solely to indicate its compatibility with other “AV600” or “300Mbps” powerline devices. Actual data speeds vary and may be limited by the product’s Ethernet port and other network conditions such as data traffic, electrical noise, and wiring issues. For better performance, powerline devices should be deployed on the same electrical circuit and rated for the same HomePlug standard. A minimum of two powerline devices are required to establish a powerline connection. If you are uncertain about your network conditions, you should consult an IT professional to assist in selecting a networking product.
**Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications along with the number of connected devices were defined according to test results under normal usage conditions. Actual wireless transmission rate, wireless coverage, and number of connected devices are not guaranteed, and will vary as a result of 1) environmental factors, including building materials, physical objects and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead and 3) client limitations, including rated performance, location, connection quality, and client condition.
*Actual power saved varies based on network conditions and environmental factors.
***Compatible with all HomePlug AV and AV2 Standard Powerline adapters. This product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or are non-standard or outdated.
Actual network speed may be limited by the rate of the product's Ethernet WAN or LAN port, the rate supported by the network cable, Internet service provider factors and other environmental conditions.