TL-SF1005P
5-Port 10/100Mbps Desktop Switch with 4-Port PoE+
- 5× 10/100 Mbps RJ45 ports
- 4× PoE+ ports transfer data and power on individual cables
- Works with IEEE 802.3af/at compliant PDs
- Supports PoE Power up to 30 W for each PoE port
- Supports PoE Power up to 67 W for all PoE ports*
- Up to 250m data and power transmitting range under Extend Mode**
- Priority Mode ensures high priority of ports 1–2 to guarantee the quality of sensitive application
- PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices
- Plug and play with no configuration required
Dedicated 4-Port PoE+ Switch (67 W Budget) for Numerous Applications
Compliance with the 802.3af/at PoE+ standard supports up to 30 W on each PoE port. The total 67 W PoE power budget* for the 4× PoE ports opens up a wide range of applications, such as surveillance for offices, dormitories, and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, and more.
Up to 30 W on Each Port
Total 67 W Power Budget
Plug and Play, No Configuration Required
-
Plug In
-
Connect Devices
Internet
IP Phone
IP Camera
Access Point
Router
TL-SF1005P
-
Enjoy
Dedicated Design for IP Surveillance
—Up to 250 m Transmissions
With extend mode, the PoE transmission distance reaches up to 250 m*—perfect for IP Camera deployment in large areas.
*The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission distance may vary due to power consumption of PoE-powered devices or the cable quality and type.
Priority Video
Quality Guaranteed
Quality of sensitive applications like video monitoring in critical business areas is guaranteed by offering higher priority options for ports 1–2 when one-touch Priority Mode is on.
Priority Mode Button
System Self-Healing
with PoE Auto Recovery
The switch automatically detects and reboots the PD devices, such as cameras and APs, when they fall offline or go unresponsive, guaranteeing the stable operation of PoE-connected devices, without need for manual monitoring and restart.
PoE Auto Recovery
IP Camera
IP Camera
PoE
Auto
Recovery
Power overload
67 W
Intelligent Power Management
When total power consumption exceeds 67 W, the intelligent power management will cut the lower priority port power. This ensures the high priority port’s power supply and protects the device from power overload. It also automatically detects and provides the required power for your PoE devices while protecting your PoE and non-PoE equipment from being damaged.
| CARACTERÍSTICAS DE HARDWARE | |
|---|---|
| Distancia de Transmisión | Store-And-Forward |
| Interface | • 5× 10/100 Mbps RJ45 Ports (4× 10/100 Mbps 802.3af/at PoE+ ports)• AUTO Negotiation• AUTO MDI/MDIX |
| Medios de Red | • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m)• 100BASE-TX: UTP category 5, 5e cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m) |
| Cantidad de Ventiladores | Fanless |
| Cerradura de Seguridad Física | Yes |
| Fuente de Alimentación Externa | External Power Adapter (Output: 53.5 V DC / 1.31 A) |
| Tasa de Reenvío de Paquete | 0.744 Mpps |
| Puertos PoE (RJ45) | • Standard: 802.3 af/at compliant• PoE Ports: Ports 1–4• Power Supply: 67 W |
| Tabla de Dirección Mac | 2K |
| Jumbo Frame | 2 KB |
| Capacidad de Switcheo | 1 Gbps |
| Dimensiones (W X D X H) | 3.9 x 3.9 x 1.0 in (99.8 x 98 x 25 mm) |
| Consumo Máximo de energía | • 3.44 W (220 V / 50 Hz, no PD connected)• 74.49 W (220 V / 50 Hz, with 67 W PD connected) |
| Disipación Máxima de Calor | • 11.73 BTU/h(no PD connected)• 254.01 BTU/h(with 67 W PD connected) |
| CARACTERÍSTICAS DE SOFTWARE | |
|---|---|
| Método de Transmisión | Store-And-Forward |
| Funciones Avanzadas | • Compatible With IEEE 802.3af/at Compliant PDs• Mac Address Auto-Learning And Auto-Aging• IEEE 802.3x Flow Control• Extend Mode Button (Ports 1–4, Up to 250 m PoE power supply and data transmission)• PoE Auto Recovery (Ports 1-4)• Priority Mode Button (Ports 1–2) |
| Otros | |
|---|---|
| Certificacion | FCC, CE, RoHS |
| Contenidos del Paquete | • TL-SF1005P• Power Adapter• Installation Guide |
| Consumo | 1.70 watts (max. no PD connected)63.51 watts (max. with 58w PD connected) |
| Ambiente | • Operating Temperature: 0–40 ℃ (32–104 ℉)• Storage Temperature: -40–70 ℃ (-40–158 ℉)• Operating Humidity: 10–90% RH non-condensing• Storage Humidity: 5–90% RH non-condensing |
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
**The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission distance may vary due to power consumption of PoE-powered devices or the cable quality and type.