EAP225-Wall
End of LifeOmada AC1200 Wireless MU-MIMO Wall-Plate Access Point
- Fast Dual-Band Wi-Fi: Simultaneous 300 Mbps on 2.4 GHz and 867 Mbps on 5 GHz totals 1,167 Mbps Wi-Fi speeds with MU-MIMO.†
- Four Ports: 4× 10/100 Mbps Ethernet ports (1× uplink + 3× downlink)△, with one downlink port supporting PoE pass-through to provide power for wired device.‡
- Integrated into Omada SDN: Centralized Cloud Management and Intelligent Monitoring.
- Centralized Management: Cloud access and Omada app for ultra convenience and easy management.§
- Elegant Appearance: Ultra slimmest and conspicuous design blends into hotel rooms, hospitals, offices, dormitories and any other environments.
- Easy Installation and PoE Support: Easy-mount construction, compatible with 86 mm & EU & US standard junction box, and 802.3af/at PoE support.
- Secure Guest Network: Along with multiple authentication options (SMS/Voucher, etc.) and abundant wireless security technologies.§
- Advanced Wireless Tech: Optimize network performance with MU-MIMO, Band Steering, and Beamforming technologies.
Learn more about Omada Cloud SDN>
Related Cases
-
Rajah Hotel
EAP225-Wall Providing Stable Wireless Signals Passing Through the Brick Walls of Rajah Hotel
Rajah Hotel
EAP225-Wall Providing Stable Wireless Signals Passing Through the Brick Walls of Rajah Hotel
-
Althea Village Greece
TP-Link Connects Communities with Reliable and Intelligent Infrastructure
Althea Village Greece
TP-Link Connects Communities with Reliable and Intelligent Infrastructure
“We chose TP-Link materials because: (1) We evaluated the reliability and performance of them as being sufficient enough, in relation with their cost and competition. (2) Whenever we needed their people, they were ready to support us appropriately. (3) The TP-Link suggested partner, was having excellent “Know How” of his job and he was acting with professionalism in collaboration with TP-Link Hellas office. For sure, we will trust again the people of TP-Link Hellas, in the future. ” ——Mr. Nikos Skarakis (Business Owner) -
RedesSemFio
Omada Builds Full-Covered WiFi with Centralized Management for an Accommodation in Brazil
RedesSemFio
Omada Builds Full-Covered WiFi with Centralized Management for an Accommodation in Brazil
-
The Muse Accommodation
Omada Builds Wall-to-Wall WiFi for Student Accommodation in Thailand
The Muse Accommodation
Omada Builds Wall-to-Wall WiFi for Student Accommodation in Thailand
| HARDWARE FEATURES | |
|---|---|
| Interface | • Uplink: 1× 10/100 Mbps Ethernet Port• Downlink: 3× 10/100 Mbps Ethernet Ports (One port supports PoE OUT. The PoE OUT feature requires 802.3at PoE input and the maximum output is 13 W.)△ |
| Physical Security Lock | Yes |
| Button | Reset |
| Power Supply | 802.3af/802.3at PoE |
| Max. Power Consumption | 9 watts /25.5 watts (PoE Out Included) |
| Dimensions ( W x D x H ) | 143 × 86 × 19.7 mm (5.6 × 3.4 × 0.8 in) |
| Antenna | 2 Dual-Band Antennas• 2.4 GHz: 2× 3 dBi• 5 GHz: 2× 4 dBi |
| Mounting | Wall Plate Mounting |
| WIRELESS FEATURES | |
|---|---|
| Concurrent Clients | 200+* |
| Wireless Standards | IEEE 802.11n/g/b/ac |
| Frequency | 2.4 GHz and 5 GHz |
| Signal Rate | • 5 GHz: Up to 867 Mbps• 2.4 GHz: Up to 300 Mbps |
| Wireless Functions | • 16 SSIDs (Up to 8 SSIDs on each band)• Enable/Disable Wireless Radio• Automatic Channel Assignment• Transmit Power Control (Adjust Transmit Power on dBm)• QoS(WMM)• Load Balance• Rate Limit• Reboot Schedule• Wireless Schedule• Wireless Statistics based on SSID/AP/Client |
| Wireless Security | • Captive Portal Authentication• Access Control• Wireless Mac Address Filtering• Wireless Isolation Between Clients• SSID to VLAN Mapping• Local LAN port based VLAN• Rogue AP Detection• 802.1X Support• 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK |
| Transmission Power | • CE:≤20 dBm (2.4 GHz, EIRP)≤23 dBm (5 GHz, EIRP)• FCC:≤21 dBm (2.4 GHz)≤21 dBm (5 GHz) |
| Management Features | |
|---|---|
| Omada App | Yes |
| Centralized Management | • Omada Hardware Controller (OC300)• Omada Hardware Controller (OC200)• Omada Software Controller |
| Cloud Access | Yes. Requiring the use of OC300, OC200, or Omada Software Controller. |
| Email Alerts | Yes |
| LED ON/OFF Control | Yes |
| Management MAC Access Control | Yes |
| SNMP | v1,v2c |
| System Logging Local/Remote Syslog | Local/Remote Syslog |
| SSH | Yes |
| Web-based Management | HTTP/HTTPS |
| L3 Management | Yes |
| Multi-site Management | Yes |
| Management VLAN | Yes |
| OTHERS | |
|---|---|
| Certification | CE, FCC, RoHS |
| Package Content | • Omada AC1200 Wireless MU-MIMO Wall-Plate Access Point EAP225-Wall• Installation Guide• Mounting Screw |
| System Requirements | Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Windows11, Linux |
| Environment | • Operating Temperature: 0–40 ℃ (32–104 ℉)• Storage Temperature: -40–70 ℃ (-40–158 ℉)• Operating Humidity: 10–90% RH non-condensing• Storage Humidity: 5–90% RH non-condensing |
†Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) client limitations, including rated performance, location, connection, quality, and client condition.
‡PoE pass-through is only available when 802.3at powers the device. The maximum power output for POE pass-through is 13 W, based on laboratory testing. Actual power delivered to the device may vary.
§Captive Portal and Cloud Access require the use of Omada SDN controllers.
*The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections.
△Non-Omada devices connected to the wired LAN ports will not be recognized by the Omada controllers, preventing users from viewing their connection status. To address this issue, connect those non-Omada devices to an Omada switch that links to the AP's wired LAN ports.