VIGI SP9030
Coming SoonVIGI Intelligent Solar Power Supply System
- 90W Photovoltaic Panel and 31.2Ah/10.8V Lithium Battery
- 3× DC Voltage Output Ports
- Modular Design
- 5°/15°/25°/35°/45°/55° Adjustable Angles
- Intelligent Auxiliary Heating Technology
- Maximum Power Point Tracking (MPPT) Charging Controller
- IP66 Weatherproof
- Remote Management and Simple Installation
Non-Stop Power Where
the Sun Shines
VIGI Intelligent Solar Power Supply System
VIGI SP9030
Customized Product Portfolio
Typical Combinations
-
VIGI SP9030 |
4G Cameras -
VIGI SP9030 |
Wireless Bridge | Bullet Cameras -
VIGI SP9030 |
Wireless Bridge | Pan Tilt Cameras
Recommended Models
-
VIGI C540-4G × 1
Highlights
-
Working Hours on Consecutive Rainy Days: 8.5 Days
-
On-load Charge on Sunny Days: 1.5 Days
-
†The data is based on TP-Link laboratory and public meteorological data obtained through model simulation. It only serves as a reference for network selection. Actual data may vary due to regional disparities, seasonal climate conditions, equipment power consumption, solar panel installation angles, and other factors. For accurate information, please refer to real-world applications and conditions.
‡On-load charge days is the time it takes for the battery to charge from 0% to 100% under load.
Recommended Models
-
VIGI C345 × 1
-
EAP115-Bridget KIT × 1
Highlights
-
Working Hours on Consecutive Rainy Days: 4.2 Days
-
On-load Charge on Sunny Days: 1.8 Days
-
† The data is based on TP-Link laboratory and public meteorological data obtained through model simulation. It only serves as a reference for network selection. Actual data may vary due to regional disparities, seasonal climate conditions, equipment power consumption, solar panel installation angles, and other factors. For accurate information, please refer to real-world applications and conditions.
‡ On-load charge days is the time it takes for the battery to charge from 0% to 100% under load.
Recommended Models
-
VIGI C345 × 1
-
VIGI C540S × 1
-
EAP115-Bridget KIT × 1
Highlights
-
Working Hours on Consecutive Rainy Days: 2.2 Days
-
On-load Charge on Sunny Days: 2.9 Days
-
† The data is based on TP-Link laboratory and public meteorological data obtained through model simulation. It only serves as a reference for network selection. Actual data may vary due to regional disparities, seasonal climate conditions, equipment power consumption, solar panel installation angles, and other factors. For accurate information, please refer to real-world applications and conditions.
‡On-load charge days is the time it takes for the battery to charge from 0% to 100% under load.
Remote Management
Control devices centrally, monitor power statistics, get low-battery alerts, update firmware, and reboot
the system via the mobile app. Enjoy peace of mind, no matter your location.
Intelligent Auxiliary Heating Technology
The built-in smart battery supports intelligent auxiliary heating technology, which allows the battery to operate normally across a wide temperature range.
-
Charge and Discharge Temperature Limit Comparison
Charging Temperature
Discharging Temperature
VIGI Smart Battery with Intelligent Auxiliary Heating
Traditional Battery without Intelligent Auxiliary Heating
-
Actual Discharge Comparison at the Same Temperature
Discharge Capability
VIGI Smart Battery with Intelligent Auxiliary Heating
21.14%
ImprovementTraditional Battery without Intelligent Auxiliary Heating
*The auxiliary heat will only be turned on when the photovoltaic system has a certain input or the battery has a certain amount of power. The test environment consisted of a 20°C aging box and 1A constant current discharge.
High-Efficiency Solar Panel
Grade A Solar Panel
25+ Years Lifespan
21.6% Conversion Efficiency
MPPT Controller Boosts Charging Efficiency
An MPPT (Maximum Power Point Tracking) controller optimizes solar panel power, reduce power losses, and increase charging efficiency by 20% compared to PWM (Pulse Width Modulation) controllers.
-
MPPT Controller
Increases Charging Efficiency by
20% -
PWM Controller
| Solar Panel (Photovoltaic Panel) | |
|---|---|
| Power | 90 W |
| Voltage | 18 V |
| Dimensions (L x W x H) | 998×516×30 mm (39.3×20.3×1.2 in) |
| Battery | |
|---|---|
| Type | Lithium |
| Intelligent Auxiliary Heat | Yes |
| Battery Capacity | 31.2 Ah |
| Voltage | 10.8 V |
| Max. Output Voltage | 12.6 V |
| Life | More than 500 cycles |
| Dimension | 242×70×65 mm (9.5×2.8×2.6 in) |
| Charging Condition | • 0°C~45°C• -30°C~45°C (With intelligent auxiliary heating) |
| Discharging Condition | • -20°C~60°C• -30°C~60°C (With intelligent auxiliary heating) |
| Angle Adjustment (Manual) | |
|---|---|
| Range | 5°/15°/25°/35°/45°/55° |
| HARDWARE | |
|---|---|
| Interface | • 1× 10/100 Mbps RJ45• 1× Photovoltaic Panel Connector• 3× 5.5mm DC Power Plugs (#1, #2: 9V-12.6 VDC/2A, #3: 12 VDC/2A) |
| Indicator LED | • Quantity: 4 (1× SYS Indicator, 1× LAN Indicator, 1× PV Indicator, 1× BAT Indicator)• Color: Blue |
| SOFTWARE FEATURES | |
|---|---|
| Load Control | Yes |
| High and Low Temperature Protection | Yes |
| Overdischarge Protection | Yes |
| Power Consumption Statistics | Yes |
| Displays Real-time Load Status | Yes |
| Battery Level Display | Yes |
| Time Zone Selection | Yes |
| Region Selection | Yes |
| Schedule Saving | Yes |
| Firmware Remote Update | Yes |
| Remote Reboot | Yes |
| Local LAN Management | Yes |
| Smart Charging Control | -30°C~5°C |
| Account Management | Yes |
| Remote Reset | Yes |
| Remote Message Push | Yes |
| OTHERS | |
|---|---|
| Certification | • CB, PSE (Battery)• CE, FCC, VCCI, IC, IP66 |
| Package Contents | • VIGI SP9030• Quick Start Guide• Waterproof Cable Attachments• Mounting Accessories |
| Box Dimensions (W X D X H) | 1110×615×225 mm (43.7×24.2×8.9 in) |
| Weight | • Product Weight: 15 kg• Package Weight: 17.5 kg |
| Environment | • Operating Temperature: -30°C-60°C (With intelligent auxiliary heating)• Operating Humidity: 10%~90%RH, Non-condensing |
**The actual shipped product doesn't include camera and EAP equipment.