AP8635-I
Coming SoonOmada Pro AX1800 Indoor/Outdoor WiFi 6 Access Point
- Ultra-Fast Wi-Fi 6 Speeds: Delivers dual-band speeds of up to 1.8 Gbps powered by the latest WiFi 6 technology†
- Long-Range Coverage: Dedicated high-power amplifier and professional antennas with IP67 waterproof & dustproof enclosure
- Intelligent Anomaly Detection and Analysis: Supports multi-dimensional anomaly detection and analysis for improved IT maintenance efficiency△
- Higher Network Efficiency: Enjoy faster speeds on more devices with less lag via OFDMA and MU-MIMO‡
- Omada Mesh Technology: Enables wireless connectivity between access points for extended range and flexible deployment△
- Centralized Cloud Management: Integrates into Omada SDN for cloud access and remote management
| HARDWARE FEATURES | |
|---|---|
| Interface | 1x 1Gbps Ethernet Port |
| Button | Reset |
| Power Supply | 802.3at PoE/ 48V Passive PoE |
| Power Consumption | EU: 12.5W(802.3at PoE or Passive PoE)US: 14.7W(802.3at PoE or Passive PoE) |
| Dimensions ( W x D x H ) | 11.1 x 4.1 x 2.2 in (280.4 x 106.5 x 56.8 mm) |
| Antenna Type | 2 Internal Dual-Band Omni Antennas• 2.4 GHz: 4 dBi• 5 GHz: 5 dBi |
| Mounting | Pole / Wall mounting (Kits included) |
| WIRELESS FEATURES | |
|---|---|
| Concurrent Clients | 1,020+§ |
| Wireless Standards | IEEE 802.11 a/b/g/n/ac/ax |
| Frequency | • 2.4 GHz• 5 GHz |
| Signal Rate | • 5 GHz: 1201 Mbps• 2.4 GHz: 574 Mbps |
| Wireless Functions | • Multiple SSIDs (16 SSIDs, 8 for each band)• Enable/Disable Wireless Radio• Enable/Disable SSID Broadcast• Guest Network• Automatic Channel Assignment• Transmit Power Control (Adjust Transmit Power on dBm)• QoS(WMM)• Seamless Roaming‡• Mesh△• Beamforming‡• MU-MIMO‡• OFDMA‡• Rate Limit(Based on SSID/Client)• Load Balance• Airtime Fairness• Band Steering• RADIUS Accounting• MAC Authentication• Reboot Schedule• Wireless Schedule• Wireless Statistics• Static IP/Dynamic IP |
| Wireless Security | • Captive Portal Authentication△• Access Control• Maximum number of MAC Filter: 4,000• Wireless Isolation Between Clients• SSID VLAN• WIDS/WIPS△• Rogue AP Detection• WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise |
| Transmission Power | • CE:<20 dBm(2.4 GHz, EIRP)<23 dBm(5 GHz Band1&2, EIRP)<28 dBm(5 GHz Band3, EIRP)• FCC:<25 dBm (2.4 GHz)<25 dBm (5 GHz) |
| MANAGEMENT | |
|---|---|
| Omada App | Yes |
| Restore & Backup | Yes |
| Firmware update via Web | Yes |
| NTP | Yes |
| Centralized Management | • Omada Pro Software Controller • Omada Pro Cloud-Based Controller |
| Cloud Access | Yes. Require the use of Omada Pro Cloud-Based Controller, or Omada Pro Software Controller. |
| Email Alerts | Yes |
| LED ON/OFF Control | Yes |
| Management MAC Access Control | Yes |
| SNMP | v1, v2c, v3 |
| SSH | Yes |
| Web-based Management | Yes |
| Zero-Touch Provisioning | Yes |
| OTHERS | |
|---|---|
| Certification | CE, FCC, RoHS |
| Environment | • Operating Temperature: -30 °C–70 °C (-22 °F–158 °F);• Storage Temperature: -40 °C–70 °C (-40 °F–158 °F);• Operating Humidity: 10%–90% non-condensing;• Storage Humidity: 5%–90% non-condensing; |
†Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.
‡Use of WiFi 6 (802.11ax) and its features, including OFDMA, HE160,MU-MIMO, Beamforming, Band Steering, 1024-QAM, and others require clients to support the corresponding features. The 160 MHz bandwidth is only available on the 5 GHz band. It may be unavailable in some regions/countries due to regulatory restrictions. The double channel width refers to 160 MHz compared to 80 MHz for general WiFi 6 APs.
△These functions require the use of an Omada Pro SDN controller.
**The maximum range of WiFi coverage is calculated based on field tests. The real transmission range may vary, according to the environment, receiving device, etc.
§The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections.