How to configure link aggregation on TP-Link Wi-Fi products

Archer C2300( V1 ) , Archer C5400( V2 ) , Archer C3150 V2 , Archer C4000( V2 V3 ) , Archer AX73 , Archer A20( V1 V3 ) , Archer AX50( V1 ) , Archer C3150( V2 ) , Archer AX6000( V1 ) , Archer AX3000( V1 ) , Archer A2300( V1 ) , Archer C5400X( V1 )
Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device, and check either the Datasheet or the firmware section for the latest improvements added to your product. Please note that product availability varies by region, and certain models may not be available in your region.
Note:The wireless router doesn't support link aggregation under the Access Point Mode.
Introduction: Some TP-Link Wi-Fi products have the Link Aggregation function which can aggregate two LAN ports together at most in order to get a higher LAN speeds up to 2Gbps theoretically.
If you build a NAS server in your local network and require a higher LAN speed than 1Gbps, the device environment could be set as below:
Note: Our products only support layer 2 LACP, don’t support layer 3 or layer 4 LACP.
Step 1:
Login the management page of the supported product.
If needed, you may refer to How do I log into the web-based Utility (Management Page) of TP-Link wireless router? for more detailed information.
Step 2:
Click Advanced, Network, and then LAN.
Step 3:
Select your model number:
For Archer AX6000/AX11000/AX50/C5400X:
Enable the Link Aggregation function, select two LAN ports you want as aggregated ports (the aggregated ports are set to LAN2 and LAN3 on AX6000/AX11000 as default). Then click Save.
For Archer C5400/C3150:
Enable the Link Aggregation function, select the work mode as “LACP active” and select two LAN ports you want as aggregated ports. Then click Save.
For Archer C2300:
Enable the Link Aggregation function, select the work mode as “Static LAG” – “SRC MAC + DST MAC” and select two LAN ports you want as aggregated ports. Then click Save.
Step 4:
Configure the Link Aggregation function on the NAS server.
For Archer AX6000/AX11000/AX50/C5400X/C2300:
Select the work mode as “Balance XOR” or the mode works with a switch that supports Static Link Aggregation.
For Archer C5400/C3150:
Select the work mode as “IEEE 802.3ad Dynamic Link Aggregation” or the mode works with a switch supports IEEE 802.3ad (Dynamic) Link Aggregation (LACP, 802.1AX).
Step 5:
Connect the NAS server to our product as we showed at first.
Step 6:
Make sure the NAS server has received a valid IP address from our product normally. You could check it in DHCP Client List.
Byla tato FAQ užitečná?
Vaše zpětná vazba nám pomůže zlepšit naše webové stránky
Co vám na tomto článku vadí?
- Nespokojen s produktem
- Příliš složité
- Matoucí nadpis
- Nevztahuje se na mě
- Příliš neurčité
- Jiné
Děkujeme
Vážíme si vaší zpětné vazby
Recommend Products
Tento web používá soubory cookies. Pokračováním v prohlížení této stránky souhlasíte s používáním našich cookies. Již nezobrazovat Zjistit více.
Tento web používá soubory cookies. Pokračováním v prohlížení této stránky souhlasíte s používáním našich cookies. Již nezobrazovat Zjistit více.
Základní cookies
Tyto cookies jsou nezbytné pro fungování webových stránek a nelze je ve vašich systémech deaktivovat.
TP-Link
accepted_local_switcher, tp_privacy_base, tp_privacy_marketing, tp_smb-select-product_scence, tp_smb-select-product_scenceSimple, tp_smb-select-product_userChoice, tp_smb-select-product_userChoiceSimple, tp_smb-select-product_userInfo, tp_smb-select-product_userInfoSimple, tp_top-banner, tp_popup-bottom, tp_popup-center, tp_popup-right-middle, tp_popup-right-bottom, tp_productCategoryType
Livechat
__livechat, __lc2_cid, __lc2_cst, __lc_cid, __lc_cst, CASID
Youtube
id, VISITOR_INFO1_LIVE, LOGIN_INFO, SIDCC, SAPISID, APISID, SSID, SID, YSC, __Secure-1PSID, __Secure-1PAPISID, __Secure-1PSIDCC, __Secure-3PSID, __Secure-3PAPISID, __Secure-3PSIDCC, 1P_JAR, AEC, NID, OTZ
Analytické a marketingové cookies
Soubory cookie pro nám umožňují analyzovat vaše aktivity na našich webových stránkách za účelem zlepšení a přizpůsobení jejich funkčnosti.
Marketingové soubory cookie mohou prostřednictvím našich webových stránek nastavit, aby se vám zobrazovali relevantní reklamy.
Google Analytics & Google Tag Manager
_gid, _ga_<container-id>, _ga, _gat_gtag_<container-id>
Google Ads & DoubleClick
test_cookie, _gcl_au
Meta Pixel
_fbp
Crazy Egg
cebsp_, _ce.s, _ce.clock_data, _ce.clock_event, cebs
lidc, AnalyticsSyncHistory, UserMatchHistory, bcookie, li_sugr, ln_or