Does my device support the Omada app?
Follow the steps below to make sure the Omada app is supported on your Omada device.
1. Find out firmware version of your Omada device.
Follow the steps below to find the firmware version of your device ( Click here to know how to find the hardware versions) :
-
STEP1
Power on the EAP and connect to the SSID of the EAP wirelessly.
Tips: If your EAP is a brand new EAP, use the default SSID (format: TP-Link_2.4GHz/5GHz_XXXXXX) printed on the product label.
-
STEP2
Launch a web browser and enter http://tplinkeap.net in the address bar.
-
STEP3
Enter the username and password of your EAP to log in.
Note: If your EAP is a brand new EAP, use the default username and password that are both admin.
-
STEP4
Go to the Monitoring > AP > Device Information page. You can view the Firmware Version as the following figure shows. The Build number indicates the released date, for example, 20180411 means the released date is April 11th, 2018.
2. Check compatibility
View the compatible devices list below to check if your device is compatible with Omada app. Please click the device image and check if you have the latest firmware. If not, download the latest firmware and follow the instructions in Step 3 to upgrade it.
Note 1: Both listed and higher hardware versions of these models are compatible with Omada APP.
Note 2: All the access points listed below are compatible with Omada App in both controller and standalone modes. While all the switches and routers listed below are compatible with Omada App only in controller mode.
*EAP245 V1, EAP225 V2/ V1, EAP115 V2/ V1, EAP110 V2/ V1, and EAP110-Outdoor V1 are also compatible with Omada App in standalone mode.
Access Points (Compatible in Controller and Standalone Modes)
-
EAP225-Wall V2
Bezdrátový přístupový bod Omada AC1200 s MU-MIMO pro montáž na stěnu
-
EAP650-Outdoor
AX3000 vnitřní/venkovní WiFi 6 přístupový bod
-
EAP670
Přístupový bod AX5400 Wi-Fi 6 pro montáž na strop
-
EAP660 HD
Multigigabitový Wi-Fi 6 přístupový bod AX3600 pro montáž na strop
-
EAP650
Přístupový bod AX3000 WiFi 6 pro montáž na strop
-
EAP655-Wall
Nástěnný Wi-Fi 6 přístupový bod AX3000
-
EAP610
Bezdrátový dvoupásmový přístupový bod pro montáž na strop AX1800
-
EAP615-Wall
Nástěnný Wi-Fi 6 přístupový bod AX1800
-
EAP610-Outdoor
Přístupový bod AX1800 WiFi 6 pro vnitřní a venkovní použití
-
EAP265 HD
AC1750 MU-MIMO bezdrátový gigabitový přístupový bod pro montáž na strop
-
EAP245 V3*
AC1750 MU-MIMO bezdrátový gigabitový přístupový bod pro montáž na strop
-
EAP225 V3*
AC1350 MU-MIMO bezdrátový gigabitový přístupový bod pro montáž na strop
-
EAP235-Wall
Bezdrátový přístupový bod Omada AC1200 MU-MIMO s gigabitovými porty a montáží na stěnu
-
EAP230-Wall
Bezdrátový přístupový bod Omada AC1200 MU-MIMO s gigabitovými porty a montáží na stěnu
-
EAP225-Outdoor
Venkovní bezdrátový přístupový bod AC1200 s MU-MIMO
-
EAP115 V4*
Bezdrátový access point 300 Mb/s standardu N pro montáž na strop
-
EAP110 V4*
Bezdrátový access point 300 Mb/s standardu N pro montáž na strop
-
EAP115-Wall
300Mbit/s bezdrátový nástěnný N access point
-
EAP110-Outdoor V3*
300Mbit/s bezdrátový venkovní N Access point
Show All 19 Access Points (Compatible in Controller and Standalone Modes)
Switches (Compatible in Controller Mode)
-
TL-SG2428P
28portový gigabitový inteligentní switch JetStream s 24 porty PoE+
-
TL-SL2428P V4
24portový 10/100 Mb/s inteligentní switch JetStream se 4 gigabitovými porty a 24 porty PoE+
-
TL-SG3210 V3
8portový gigabitový L2+ řízený switch JetStream se 2 SFP sloty
-
TL-SX3206HPP
6portový 10GE L2+ řízený switch JetStream se 4 PoE++ porty
-
TL-SG2218
16portový gigabitový inteligentní switch JetStream s 2 SFP sloty
-
TL-SG3210XHP-M2
Řízený switch JetStream L2+ s 8 porty 2.5GBASE-T podporujícími PoE+ a 2 porty 10GE SFP+
-
TL-SG3452XP
Řízený switch JetStream L2+ s 48 gigabitovými porty a 4 10GE SFP+ sloty a napájením PoE+ na 48 portech
-
TL-SG3428XMP
Řízený switch JetStream L2+ s 24 gigabitovými porty a 4 10GE SFP+ sloty a napájením PoE+ na 24 portech
-
TL-SX3016F
16portový 10GE SFP+ L2+ řízený switch JetStream
-
TL-SG2210P V3.20
10portový gigabitový inteligentní switch JetStream s 8 porty PoE+
-
TL-SG2210MP
10portový gigabitový inteligentní switch JetStream s 8 porty PoE+
-
TL-SG3452P
52portový gigabitový L2+ řízený switch JetStream se 48 porty PoE+
-
TL-SX3008F
8portový 10GE SFP+ L2+ řízený switch JetStream
-
TL-SG3428MP
28portový gigabitový L2+ řízený switch JetStream se 24 porty PoE+
-
TL-SG2008P
8portový gigabitový inteligentní switch JetStream se 4 porty PoE+
-
TL-SG3452X
Řízený switch JetStream L2+ s 48 gigabitovými porty a 4 10GE SFP+ sloty
-
TL-SG3428X
Řízený switch JetStream L2+ s 24 gigabitovými porty a 4 10GE SFP+ sloty
-
TL-SG3452
48portový gigabitový L2+ řízený switch JetStream se 4 SFP sloty
Show All 18 Switches (Compatible in Controller Mode)
3. Upgrade the firmware of your Omada device.
Follow the steps below to upgrade the firmware of your device:
-
STEP1
Power on the EAP and connect to the SSID of the EAP wirelessly.
Tips: If your EAP is a brand new EAP, use the default SSID (format: TP-Link_2.4GHz/5GHz_XXXXXX) printed on the product label.
-
STEP2
Launch a web browser and enter http://tplinkeap.net in the address bar.
-
STEP3
Enter the username and password of your EAP to log in.
Note: If your EAP is a brand new EAP, use the default username and password that are both admin.
-
STEP4
Go to the System > Firmware Update page. Click the button, locate and choose the correct firmware file from your host. Then click the button to update the firmware of the EAP. After upgraded, the EAP will be rebooted automatically.