Omada 5GHz 867Mbps Indoor/Outdoor Wireless Bridge
- 802.11ac for up to 867 Mbps on the 5 GHz wireless data rate.*1
- Ideal for long-range wireless transmission up to 1 km.*2
- Auto-pairing and agile LEDs for efficient deployment.
- 3× Gigabit Ethernet ports for more high-speed IP camera connections.*6
- Supports Omada SDN for remote and centralized management.
- IP65 weatherproof enclosure and 6kV lightning protection ensure all-weather suitability.*3
- Supports Passive PoE for flexible deployment (adapter included).
ХАРДУЕРНИ ХАРАКТЕРИСТИКИ | |
---|---|
Интерфейс | 3x Gigabit Ethernet Ports*6 |
Бутон | Reset |
Захранване | 12V DC / 24V Passive PoE (Passive PoE adapter included.) |
Консумирана енергия | 11.5W |
Размери (Ш x Д x В ) | 3.1 x 2.4 x 8.8 in (79 × 60 × 224 mm) |
Тип антена | Internal 2×2 Dual-polarized directional MIMO antennas5 GHz: 7.0 dBiHorizontal:70°, Vertical: 70° |
Weatherproof Enclosure | IP65 |
Монтаж | Pole Mounting (Accessories included) |
БЕЗЖИЧНИ ХАРАКТЕРИСТИКИ | |
---|---|
Coverage | 1000m(3280ft)5 |
Безжични стандарти | IEEE 802.11 a/b/g/n/ac |
Честотa | 5 GHz |
Скорост на сигнала | 5 GHz: Up to 867 Mbps |
Безжични функции | • Mesh*4• MU-MIMO: 5G 2x2 MU-MIMO DL • Load Balance• Seamless Roaming(802.11r)• Beamforming• Airtime Fairness• Multiple SSIDs:8 • Wireless Statistics• Wireless Schedule• Reboot Schedule• RADIUS Accounting• MAC Authentication• Static IP/Dynamic IP |
Безжична сигурност | • VLAN• Access Control• Rogue AP Detection• Captive Portal Authentication*4• Maximum number of MAC Filter: 4,000• WPA-Personal/Enterprise, WPA2-Personal/Enterprise |
Предавателна мощност | • CE: <23dBm (5 GHz, band 1/2, EIRP);<28.5dBm (5 GHz, band3, EIRP)• FCC: <22dBm (5 GHz, band1/4) |
MANAGEMENT | |
---|---|
Omada App | Yes |
Restore & Backup | Yes |
Firmware update via Web | Yes |
NTP | Yes |
Centralized Management | • Omada Hardware Controller (OC300)• Omada Hardware Controller (OC200)• Omada Software Controller• Omada Cloud-Based Controller |
Cloud Access | Yes. Require the use of OC300, OC200, the Omada Software Controller, or Omada Cloud-Based Controller. |
Управление Вкл/Изкл на LED | Yes |
Управление на контрола на достъпа по МАС адрес | Yes |
SNMP | v1, v2c, v3 |
SSH | Yes |
Уеб-базирано управление | Yes |
ДРУГИ | |
---|---|
Сертификати | CE, FCC, RoHS |
Съдържание на пакета | • EAP211-Bridge KIT• Passive PoE Adapter• Power Cord• Installation Guide• Mounting Kit |
Околна среда | • Operating Temperature: -40 °C–70 °C (-40 °F–158 °F);• Storage Temperature: -40 °C–70 °C (-40 °F–158 °F);• Operating Humidity: 10%–90% non-condensing;• Storage Humidity: 5%–90% non-condensing |
1. Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications, along with the number of connected devices, were defined according to test results under normal usage conditions. Actual wireless transmission rate, wireless coverage, and number of connected devices are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles; 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead; and 3) client limitations, including rated performance, location, connection quality, and client condition.
2. All products are tested in real outdoor environments. Actual range and throughput depend on the transmission power and environmental factors such as wireless interference, obstacles, weather, etc.
3. Protection against lightning and electro-static discharge may be achieved through proper product setup, grounding, and cable shielding. Refer to the instruction manual and consult an IT professional to assist with setting up this product.
4. These functions require the use of an Omada SDN controller.
5. Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors.
6. Non-Omada devices connected to the wired LAN ports will not be recognized by the Omada controllers, preventing users from viewing their connection status. To address this issue, connect those non-Omada devices to an Omada switch that links to the bridge's wired LAN ports.