Archer MR600
4G+ Cat6 AC1200 Wireless Dual Band Gigabit Router
- TP-Link's First 4G+ Router – supports 4G+ Cat6 to boost the data speeds of up to 300 Mbps*
- Plug a SIM card and play – no configurations needed, compatibility of SIM cards in 100+ countries are assured by years of field tests
- MU-MIMO supported – simultaneous data streams increase WiFi throughput and network efficiency.
- Supports TP-Link OneMeshTM – co-works with TP-Link OneMesh products to create a flexible and cost-efficient Mesh network
- Better Signal for Connections Everywhere – enjoy stable and efficient connections to every device thanks to the two external LTE antennas
- Full Gigabit Ports – provides reliable wired connections for bandwidth-intensive devices such as game consoles and STB
- Wi-Fi router mode – plug an Ethernet cable into the LAN/WAN port for flexible access if you can't get a 4G connection
- Easy setup and management all by Tether app
HARDWARE FEATURES | |
---|---|
Interface | 1 × 10/100/1000 Mbps LAN/WAN Port3 × 10/100/1000 Mbps LAN Ports1 × Micro SIM Card Slot |
Button | WPS/Reset Button, WiFi On/Off Button, Power On/Off Button |
External Power Supply | Power Adapter: : Input Power 100-240v~50/60 Hz 0.6AOutput parameter 12VDC 1.5A |
Dimensions ( W x D x H ) | 202 × 141 × 33.6 mm (7.95 × 5.55 × 1.32 in) |
Antenna | 2 × Detachable 4G LTE Antennas |
WIRELESS FEATURES | |
---|---|
Wireless Standards | IEEE 802.11a/n/ac 5 GHz, IEEE 802.11b/g/n 2.4 GHz |
Frequency | 2.4 GHz and 5 GHz |
Signal Rate | 300 Mbps at 2.4 GHz, 867 Mbps at 5 GHz |
Reception Sensitivity | 5 GHz: 11a 54M: -77 dBm11ac HT20: -73 dBm11ac HT40: -68 dBm11ac HT80 : -64 dBm11n HT20: -77 dBm11n HT40: -73 dBm2.4 GHz: 11g 54M: -74 dBm11n HT20: -72 dBm11n HT40: -69 dBm |
Transmit Power | < 20 dBm (2.4 GHz), < 23 dBm (5 GHz) |
Wireless Functions | Enable/Disable Wireless Radio, Wireless Schedule, WMM, Wireless Statistics |
WAN Failover | Yes |
Wireless Security | 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryptions |
Network Type | 4G: FDD-LTE: B1/B3/B5/B7/B8/B20/B28 (2100/1800/850/2600/900/800/700 MHz) TDD-LTE: B38/B40/B41 (2600/2300/2500 MHz)3G: DC-HSPA+/HSPA/UMTS: B1/B5/B8 (2100/850/900 MHz)Carrier Aggregation:B1+B3/B5/B7/B8/B20B3+B1/B3/B5/B7/B8/B20/B28/B38/B40B5+B1/B3/B5/B7/B40B7+B1/B3/B5/B7/B8/B20/B28B8+B1/B3/B7B20+B1/B3/B7B28+B3/B7/B40B38+B38B40+B40B41+B41 |
SOFTWARE FEATURES | |
---|---|
Quality of Service | Bandwidth Control |
Security | DoS, IPv4 SPI Firewall, IPv6 Firewal, IP and MAC Address Binding, Access Control |
WAN Type | Dynamic IP/Static IP/PPPoE/PPTP(Dual Access)/L2TP(Dual Access) |
Management | TP-Link Cloud, Local Management, Remote Management |
DHCP | Server, DHCP Client List, Address Reservation |
Port Forwarding | ALG, Virtual Server, Port Triggering, UPnP, DMZ |
Dynamic DNS | TP-Link, DynDns, NO-IP |
VPN | PPTP VPN, OpenVPN |
Access Control | Parental Control, Local Management Control |
Protocols | IPv4, IPv6 |
Guest Network | 2.4 GHz Guest Network x 1, 5 GHz Guest Network x 1 |
OTHERS | |
---|---|
Certification | CE, RoHS |
Package Contents | 4G+ Cat6 AC1200 Wireless Dual Band Gigabit Router Archer MR600Power AdapterRJ45 Ethernet CableQuick Installation Guide |
Environment | Operating Temperature: 0℃~40℃ (32℉ ~104℉)Operating Humidity: 10%~90% non-condensingStorage Humidity: 5%~90% non-condensing |
*Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage, and quantity of connected devices are not guaranteed and will vary as a result of network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.