What should I do if I fail to configure the Kasa Smart Wire-Free system?

KC310S2 , KC300S2
Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device, and check either the Datasheet or the firmware section for the latest improvements added to your product. Please note that product availability varies by region, and certain models may not be available in your region.
The Kasa app will guide you step-by-step during the initial configuration, however, you may not be able to get through all the steps due to some interference. This FAQ will tell you what to do if you have trouble getting through a certain step.
Fail to configure the Kasa hub.
1) Try a different power adapter or power socket.
2) Ensure the power cord and the Ethernet cable is connected to the Kasa hub tightly.
3) Press and hold on the reset button on the Kasa hub for 15 seconds to reset the hub to factory default settings. Wait till the LED is flashing orange and green and then try again.
Case 2: Got stuck on “Search for Your Hub” and then reported “No Hub Found”.
- Confirm your Kasa hub is powered on and connected to your router via an Ethernet cable tightly.
- Ensure your smartphone is connected to the same router as the Kasa hub.
- Kindly check whether you have connected to Guest Wi-Fi.
- Check whether the Kasa hub is added to the Blacklist or Whitelist of your router.
- Kindly check whether you have set a firewall on the router to block the connection in the same network.
- Try to use a different phone to configure the Kasa hub.
Please note that the LED on the Kasa hub will turn off automatically after the configuration is completed.
Fail to configure the Kasa Wire-Free camera.
Case 1: No LED on the camera or the LED is not flashing orange and green.
1) If the LED is off, press the Sync button for 1s to turn on the camera, or connect the power adapter to the camera.
2) If the LED does not flash orange and green, press the Sync button for 15 seconds to reset the camera to factory default settings.
Note: When you press the Sync button for 5 seconds, you will hear the camera saying “Release to turn off the camera, continue to press to erase all the settings”. The LED flashes blue first, then turns orange. After that, you can release the Sync button.
Case 2: Got stuck on “Searching for Available Hubs” and then reported “Hub Offline”.
1) Move the camera closer to the Kasa hub.
2) Check if the Kasa hub is online or not and ensure the router has internet access.
3) On the phone, go to Settings > WLAN to confirm that the phone is connected to the same Wi-Fi router as the Kasa hub.
4) Try a different phone.
Case 3. Getting stuck on “Press the Sync Button” and then reported “No Camera Found”.
1) Move the camera next to the Kasa hub (no more than three feet).
2) If the camera LED is flashing red, connect the power adapter to it, wait for the LED turns flash orange and green, and then click on “Try Again”.
3) If the LED remains abnormal, press the Sync button for 15 seconds to reset the camera and configure it again.
If the above suggestions can’t solve your problem, it’s suggested to contact TP-Link support.
Is this faq useful?
Your feedback helps improve this site.
What’s your concern with this article?
- Dissatisfied with product
- Too Complicated
- Confusing Title
- Does not apply to me
- Too Vague
- Other
Thank you
We appreciate your feedback.
Click here to contact TP-Link technical support.
Recommend Products

TP-Link Community
Still need help? Search for answers, ask questions, and get help from TP-Link experts and other users around the world.
This website uses cookies to improve website navigation, analyze online activities and have the best possible user experience on our website. You can object to the use of cookies at any time. You can find more information in our privacy policy . Don’t show again
This website uses cookies to improve website navigation, analyze online activities and have the best possible user experience on our website. You can object to the use of cookies at any time. You can find more information in our privacy policy . Don’t show again
Basic Cookies
These cookies are necessary for the website to function and cannot be deactivated in your systems.
TP-Link
accepted_local_switcher, tp_privacy_base, tp_privacy_marketing, tp_smb-select-product_scence, tp_smb-select-product_scenceSimple, tp_smb-select-product_userChoice, tp_smb-select-product_userChoiceSimple, tp_smb-select-product_userInfo, tp_smb-select-product_userInfoSimple, tp_top-banner, tp_popup-bottom, tp_popup-center, tp_popup-right-middle, tp_popup-right-bottom, tp_productCategoryType
Livechat
__livechat, __lc2_cid, __lc2_cst, __lc_cid, __lc_cst, CASID
Youtube
id, VISITOR_INFO1_LIVE, LOGIN_INFO, SIDCC, SAPISID, APISID, SSID, SID, YSC, __Secure-1PSID, __Secure-1PAPISID, __Secure-1PSIDCC, __Secure-3PSID, __Secure-3PAPISID, __Secure-3PSIDCC, 1P_JAR, AEC, NID, OTZ
Analysis and Marketing Cookies
Analysis cookies enable us to analyze your activities on our website in order to improve and adapt the functionality of our website.
The marketing cookies can be set through our website by our advertising partners in order to create a profile of your interests and to show you relevant advertisements on other websites.
Google Analytics & Google Tag Manager
_gid, _ga_<container-id>, _ga, _gat_gtag_<container-id>
Google Ads & DoubleClick
test_cookie, _gcl_au
Meta Pixel
_fbp
Crazy Egg
cebsp_, _ce.s, _ce.clock_data, _ce.clock_event, cebs
lidc, AnalyticsSyncHistory, UserMatchHistory, bcookie, li_sugr, ln_or