1.0-1_normal_1603693475014u.jpg)
1.0-R-2_normal_1603693486226d.jpg)
1.0_04_normal_1607229866754q.jpg)
1.0-3_normal_1603693498403q.jpg)
1.0_Gigabit_WDM_Media_Converter_3_normal_20220421021041e.jpg)
1.0_Gigabit_WDM_Media_Converter_4_normal_20220421021052b.jpg)
1.0_Gigabit_WDM_Media_Converter_05_normal_20220421021104j.jpg)
1.0_Gigabit_WDM_Media_Converter_6_normal_20220421021115t.jpg)
1.0-1_large_1603693475014i.jpg)
1.0-R-2_large_1603693486226k.jpg)
1.0_04_large_1607229866754s.jpg)
1.0-3_large_1603693498403j.jpg)
1.0_Gigabit_WDM_Media_Converter_3_large_20220421021041a.jpg)
1.0_Gigabit_WDM_Media_Converter_4_large_20220421021052y.jpg)
1.0_Gigabit_WDM_Media_Converter_05_large_20220421021104j.jpg)
1.0_Gigabit_WDM_Media_Converter_6_large_20220421021115m.jpg)
Gigabit WDM Media Converter
- 1× 10/100/1000Mbps Auto-Negotiation RJ45 port supports Auto-MDI/MDIX
- Auto-negotiation of Half-Duplex/Full-Duplex transfer mode
- Adopts WDM technology, transmitting and receiving data on one single fiber
- Extends fiber distance up to 2 km
| NETWORK | |
|---|---|
| Standards and Protocols | IEEE 802.3i, 802.3u, 802.3ab, 802.3z |
| HARDWARE FEATURES | |
|---|---|
| Interface | • 1× Gigabit SC Fiber Port• 1× 10/100/1000 Mbps RJ45 Port (Auto MDI/MDIX) |
| Network Media | • Single-mode Fiber• UTP category 5, 5e cable (maximum 100m) |
| Power Supply | External Power Adapter: 5 V/0.6 A |
| LED | PWR, Link/Act |
| Wave Length | 1550 nm TX, 1310 nm RX |
| Dimensions ( W x D x H ) | 3.7×2.9×1.1 in (94.5×73.0×27.0 mm) |
| MEDIA CONVERTER & MODULE | |
|---|---|
| Fiber Type | 9/125 μm single-mode fiber (≤2 km) |
| ENVIRONMENT | |
|---|---|
| Operating Temperature | 0˚C to 50˚C (32˚F to 122˚F) |
| Storage Temperature | -40˚C to 70˚C (-40˚F to 158˚F) |
| Operating Humidity | 10% to 90% RH non-condensing |
| Storage Humidity | 5% to 90% RH non-condensing |
| OTHERS | |
|---|---|
| Package Content | • Media Converter TL-FC311A-2• Power Adapter• Installation Guide |